ETS20 DR HITEMP M20 Emergency Lighting Control Device

Emergency Lighting Control Device: 120/277V, Max Load: 8 Amp (LED Driver), 20 Amp (Ballast), 10 Amp (Incandescent). Unit temperature withstand condition range of -20° to 55° C. Dimensions: 4.625" x 2.25" x 2.25"

The IOTA ETS20 DR Emergency Lighting Control Device allows the use of auxiliary generator or

inverter power on switched fixtures in power failure situations. The ETS20 DR senses the loss

of normal AC power and bypasses local control devices such as switches, occupancy sensors,

or timers, providing emergency power to the fixtures regardless of the control setting. The

ETS20 DR allows for operation of the load at full light output until normal power is restored

or for as long as the generator or inverter supply is available. The ETS20 DR will work in

conjunction with any fixture on the designated 20 amp circuit per the rated specifications.

Allowing for the use of switched fixtures with a generator or inverter supply eliminates the

need for night lights and promotes increased energy savings. The dimming relay leads accommodate two 0-10 volt dimming zone controls, providing full light output in both zones

during emergency mode regardless of dimmer setting.